



| Local | FREE * |
| National | FREE * |
| International | FREE * |
![]() | |
| Local | 10c untimed |
| Capital Cities | 10c untimed |
| Regional | 10c untimed |
| Mobiles from | 14c/min ^ |
| Overseas from | 2.9c/min |
+ see VoIP Pricing Plans
^ with Mobile Advantage



Grandstream BudgeTone 101 and 102
|
This is a full featured SIP desktop IP phone with a single ethernet interface. This means that you will need an open ethernet port on your local network. It has a built in speakerphone, and for the price, is highly recommended. It is fairly simple to setup. The default configuration will get an IP address via DHCP. There have been reports that if you are running Zone Alarm on your PC, it will have to be turned off to sucessfully open the phone's configuration page. The full manual can be found on Grandstream's Website. |
Step 1
You must first determine what IP address it received. To do this, press the menu button, then the down arrow next to it until the display shows:
[2] IP Addr
Press the menu button again and the IP address of your device will appear (e.g. 164.178.12.3).
Step 2
Go to any browser equipped computer on your network and enter the IP address of your device http://<IP ADDRESS>/ (replace <IP ADDRESS> with the address that was given to you in Step 1).
Step 3
You will be prompted to enter a password, the default is "admin", then click the "Login" button.
Step 4
There are a number of fields you need to modify on this page. These are shown circled below. In order to determine what settings to use here, please use the 'Mytel VoIP Setup Assistant', selecting in 'Step 1' the 'Other VoIP Products' option, then selecting the Mytel VoIP Extension you want to configure in 'Step 2', followed lastly by clicking the 'Setup VoIP Hardware' button. You will then be taken to a page showing you your Mytel VoIP Extension Username and Password, as well as the Proxy server to use.
| SIP Registration: Yes | ![]() |
| NAT Traversal: No | ![]() |
| TFTP Server: Change IP to 168.75.215.189 | ![]() |
Step 5

Click on the "Update" button at the bottom of the form.
Step 6
You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".
Step 7

Click on the "Reboot" button at the bottom of the form.
Step 8
Lift your handset and listen for a dial tone. Make a call.

















